Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Venue address
Melton Mowbray, LE14,
United Kingdom
Foundry Sale On Behalf Of Saint Gobain - Due To Site Closure - To Incl Overhead Cranes, Racking, Lathes, Milling Machines, Compressor & More
To Include Overhead Cranes, Racking, Lathes, Milling Machines, Compressor, Conveyors & More
Auction dates
Starts:
20 Dec 2024 17:30 GMT
Ends from:
20 Feb 2025 13:00 GMT
Viewing dates
By appointment only
19 Feb 2025 10:00 - 15:00 GMT
|
Auction currency
|
GBP |
|
Buyer's premium
|
20 % |
|
VAT on hammer
|
20 % |
|
Accepted cards
|
|
|
Other payment methods
|
We found 302 items matching your search
Refine results
Filter by
Primary Category
Category
Brand
Item Type
Sale Section
Country
Town/City
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
PLEASE DO NOT BID ON THIS LOT, THIS IS FOR INFORMATION ONLY
ABOUT THE SITE
Due to the recent closure of the site, we present the entire contents of this foundry for auction.
COLLECTION DETAILS
Collection location : Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day : Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots : not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note : Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Avery Weighbridge
Includes staircases around and saphymo sensors
Approximate Dimensions:
Width - 300cm
Depth - 15Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 328
Location - Site Entrance
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wooden Bike Racks x5
Approximate Dimensions:
Height - 140cm
Width - 270cm
Depth - 200cm
Ref - 329
Location - site entrance
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
King Rich KR-V3000
Vertical Milling Machine
Serial - 6529
Motor power3.75kW (5hp)
Machine weight1650 kg
Approximate Dimensions:
Height - 200cm
Width - 200cm
Depth - 130cm
Ref - 331
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
L132 Compressor
Make: Compair L132
Model: L132 - 7.5 A
Supply: 550V/50Hz
Phase: 3
Rate of flow - 24.2
Compression Medium - Air
gross weight - 4135kg
Approximate Dimensions:
Height - 200cm
Width - 350cm
Depth - 180cm
RAMS & a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection.
Ref - 6 Location - Compressor Room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Interclass SSR Compressor
Make:Ingersoll-Rand
Model: M132
Supply: 400v 50Hz
Phase: 3
Weight - 3075 kg
Rate Pressure 7.5 Bar
Approximate Dimensions:
height 150cm
Width - 320cm
Depth - 160cm
Approximate Dimensions:
RAMS & a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection.
Ref - 7 Location - Compressor Room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin Bursgreen B7G
Twin 16" disc
9x25" tables.
2Hp 3 Phase motor
Approximate Dimensions:
Height - 120cm
Width - 80cm
Depth - 60cm
Ref - 337
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Mecc Alte Spa Eco34-1s Generator
KVA - 80
Serial number: 915367
Wattage / kVA: 80
KW 64
Volts 415
3 Phase
50Hz
Number of owners/ working order if tested
(Picture of engine required if in a container plus serial plate)
Approximate Dimensions:
RAMS & a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Ref - 10 Location - Outside
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin Dual Sander
400V
Rest of makers plate is not visible
Approximate Dimensions:
Height - 150cm
Width - 150cm
Depth - 90cm
Ref - 341
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Fromm Banding wheel
strapper not included
Approximate Dimensions:
Height - 95cm
Width - 70cm
Depth - 30cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 342
Location - Maintenance
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Factair Mobile Compressor
Model - M27E
Serial - 1027 845330
Weigth 545kg
Rated Power - 15,0 +0,63KW
Max working pressure - 7 Bar
Year - 01/22
Working hours unknown as item was not in use
Approximate Dimensions: Height - 90cm Width - 130cm Depth - 100cm
Ref -12
Location - Outside rear
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin FM657 Slotted Planer
Machine test no 71424
415 V
3Ph
50Hz
Approximate Dimensions:
Height - 100cm
Width - 199cm
Depth -100cm
Ref - 344
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Woden 11KV Transformer
KVA - 2525
50Hz
Year - 1983
Serial 120321
Total Mass -8500kg
Cooling liquid 3200 Litres
Approximate Dimensions of area as cannot measure exact size of item due to being fenced off:
Height - 200cm
Width - 200cm
Depth - 200cm
Ref - 16
Location - Melting Shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Woden 11KV Transformer
KVA - 2525
50Hz
Year - 1983
Serial 120321 -3237
Total Mass -8500kg
Cooling liquid 3200 Litres
Approximate Dimensions of area as cannot measure exact size of item due to being fenced off:
Height - 200cm
Width - 200cm
Depth - 200cm Ref - 17 Location - Melting Shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Zimmerman PS1 Vertical Sander
PS1
1.6Kw
440V
50hz
Year 1974
Nr 150
Approximate Dimensions:
Height -140cm
Width - 60cm
Depth - 130cm
Ref - 352
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin JTA643 Disc and Bobbin Sander
Machine No 46144
Voltage 415
Phase 3
Cycles 50Hz
Approximate Dimensions:
Height - 130cm
Width - 100cm
Depth -180cm
Ref - 353
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
50 Ton Mega Shop Press
Year 2013
Ref D50
Serial - 52021
Approximate Dimensions: Height - 185cm Width - 90cm Depth - 70cm
Ref - 354
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
22
Pillar Drill
No Visible branding or maker plate
Approximate Dimensions:
Height - 180cm
Width - 45cm
Depth -70cm
Ref - 357
Location - Maintenance
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Shotblast Extraction System
Shotblast extraction has a 32-kW motor, with cyclone in the system and bag cleaning pulse unit
Ref -23
Location - Finishing/Shotblast Area
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Electric Roller Shutter Door
Approximate Dimension:
Height - 250cm
Width -220cm
Depth -20cm
Ref - 24
Location - Rear of fabrication shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Extraction System From Fabrication Shop
Extracts grinding dust from fabrication shop
Approximate Dimension:
Height - 10m
Width -450cm
Depth -500cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 25
Location - Rear of fabrication shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Fanuc Ltd A2/3000 Robot Welder
You are bidding on robotic welding arm only. excluding the bench.
Motor Spec A06b-0373-B175
Output - 0.5kw
Volt 129
Freq 200 Hz
3 Phase
Speed 3000 Min
Approximate Dimensions: Height - 200cm
Width - 100cm
Depth - 50cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 26
Location - Fabrication Shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Fanuc Ltd A2/3000 Robot Welder
You are bidding on robotic welding arm only. excluding the bench.
Motor Spec A06B-0373-B175
Output - 0.5kw
Volt 129
Freq 200 Hz
3 Phase
Speed 3000 Min
Approximate Dimensions: Height - 200cm
Width - 100cm
Depth - 50cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 27
Location - Fabrication Shop
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Dalmec PEC Lifting Arm
Type - PEC
Construction Year - 2019
Max Load - 60kg
Operating Pressure - 0.90MPa
Approximate Dimensions:
Height - 250cm
Width - 300cm
Depth 50 cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 28 Location - Fabrication Room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Dalmec PEC Lifting Arm
Type - PEC
Construction Year - 2019
Max Load - 60kg
Operating Pressure - 0.90MPa
Approximate Dimensions:
Height - 250cm
Width - 300cm
Depth 50 cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 29 Location - Fabrication Room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Andromat Cab Driven Hydraulic Manipulator
with claw and magnet, includes carousel
Specification and information folder available upon request.
Approximate Dimensions; Height: 220cm
Width: 350cm
Depth: 400cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 30
Location - Finishing room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
31
Dip Oven
Burner 1 Has 1 Burner and Fan Chain from the dip runs through the oven
Max 50 degree oven, burner may go higher but oven is maxed at 45-50
Ref - 33
Approximate Dimensions: Height- 200cm
Width - 350cm
Depth - 400cm
Location - Dip
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
32
Dip Oven 2
Burner 2 Has 1 burner and 1 fan
Burner highest temp is unknown but oven max out at 45-50 degrees
Approximate Dimensions:
Height- 200cm
Width - 350cm
Depth - 400cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 32
Location - Dip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
33
Dip Oven 3
Burner Includes 1 burner and fan
Maxes out at 45-50 degree, burner may burn higher
Ref - 33
Approximate Dimensions: Height- 200cm Width - 350cm Depth - 400cm
Location - Dip
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Dip Tracked Chain that carries material through a paint process
Approximate dimensions:
Chain is sat at 2 metres in the air
Approximate Length of track is between 100-150 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 34
Location - Finishing room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Clansman Dynamic Hydraulic Manipulator,
Used for breaking up the running system where iron pours through to make the castings.
Item is in a caged area
Big jaw on end of arm
Ref - 35
Location - Finishing room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Clansman Dynamic Hydraulic Manipulator
Used for removing castings from jost conveyor
Approximate Dimensions: Height - 220cm Width - 250cm Depth -120cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 36
Location - Finishing room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jost Conveyor Steel Vibrating Conveyor
Used to transport the blocks around site
On a slight decline
Approximate Dimensions: Height - 140-200cm Width - 175cm Length - 35 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 37
Location - Behind Drip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jost Conveyor Steel vibrating conveyor used to transport the blocks around site
On a slight decline
Approximate Dimensions: Height - 120cm Width - 175cm Length - 30 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 38
Location - Behind Drip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jost Conveyor Steel Vibrating Conveyor
Used to transport the blocks around site
On a slight decline
Approximate Dimensions: Height - 140-200cm Width - 175cm Length - 25 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 39
Location - Behind Drip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jost Conveyor Steel Vibrating Conveyor
Used to transport the blocks around site
On a slight decline
Approximate Dimensions: Height - 140-200cm Width - 175cm Length - 35 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 40
Location - Behind Drip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jost Conveyor Connects to conveyor 3 and 1
Steel vibrating conveyor used to transport the blocks around site
Approximate Dimensions: Height - 120cm Width - 175cm Length - 25 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 41
Location - Dip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Shaking / Rotating Carousel Round Conveyor,
Items are transported in circles and shaken until leaves the conveyor.
Approximate Dimensions; Height:700cm Width:700cm Depth:700cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 44
Location - Finishing room
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2 Tiered Shot Blasting Machine
Up to 8 impeller motor sending shots into the cabinet
Shot recovery system to keep reusing the shots Includes acoustic panelling housing
Approximate Dimensions of housing
Height - 10 Metres
Width - 18 Metres
Depth - 6 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 45
Location - Shot Blasting Area
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Fettling Extraction System
Fettling extraction has a 132-kW motor, with a filter bag system that is cleaned with a cleaning carriage
Dust and sand extraction system from drip area of factory Approximate Dimensions: Height - 13 Metres Width - 12 Metres Depth - 5 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 46
Location - Drip
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Shakeout Steel Conveyor and Hydraulic Ram
Pushes casting off and shakes to break all sand off.
Sand goes down below onto conveyor to be reused and then casting moves along
Approximate Dimensions: (viewing recommended)
Height - 200cm Width - 550cm Depth - 10 Metres
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref -47
Location - Shakeout Area
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Furnace Pump House
Water pumps for cooling the furnace Amiad 6” and 8” inline filters
Approximate Dimensions of housing: Height - 185cm Width - 200cm Depth - 220cm
Ref - 48
Location - near furnace
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Stamford Newage Diesel Generator
Type - 03448
P.F. 0.8
Volts 380/415
Rating Cont
K.V.A 72
R.P.M 1500
AMPS 109/100
50 Hz
3 Phase
Ambient Temp 40C
Enclosure IP21
Hours - TBC
Ref - 49
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
50
Sand Plant
Multiple conveyor belts
Screen - large rotating sieve Cooler - shaking deck that allows sand to travel and cool Mill
Giant propellor with 2 x stirrers that mix sand together with water
Has 2x silos for additive storage
Plant runs the length of a large portion of the production line, it includes all walkways and stairwells
Ref - 50
Approximate Dimensions: Height - 20 Metres Width - 30-40 Metres Depth - 20 Metres
Location - Sand Plant
Sand plant extraction 1 - 160-kW motor with a bag cleaning pulse unit
Sand plant extraction 2 – 200-kW motor with a bag cleaning pulse unit
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Magnetic Belt
Has a magnet surrounding conveyor belts that picks up any scrap and empties into a pan 2 drum machine
Approximate Dimensions: Height - 180cm Width - 300cm Depth - 150cm
Ref - 51
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Magnetic Belt Has a magnet surrounding conveyor belts that picks up any scrap and empties into a pan 2 drum machine Approximate Dimensions: Height - 180cm Width - 300cm Depth - 150cm
Ref - 52
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Magnetic Belt
Has a magnet surrounding conveyor belts that picks up any scrap and empties into a pan 2 drum machine
Approximate Dimensions: Height - 180cm Width - 300cm Depth - 150cm
Ref - 53
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
KunKel Wagner Main moulding machine,
Sand comes in with hydraulic rams that squeeze mould.
2 boxes put onto track then iron get poured in
Approximate Dimensions: Height - 750cm Width - 20 Metres Depth - 10 Metres
Ref - 54
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Kunkel Wagner Mill
Part of the sand plant machine
Approximate Dimensions: Height - 12 Metres Width - 8 Metres Depth - 10 Metres
Ref - 55
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Core Machines
Use gas and sand to make little sand castings used in moulding process
Approximate Dimensions; Height:200cm Width:400cm Depth:150cm
Ref-56
Location- factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Core Machines
Uses gas and sand to make little sand castings used in moulding process
Approximate Dimensions: Height - 800cm Width - 220cm Depth - 400cm
Ref 58
Location - Factory
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
2006 Vauxhall Corsa Renovated into a small van style
Needs a new clutch
Miles - 93829
Reg - WN06 ZKJ
Cylinder Capacity 1248cc
Fuel Type - Diesel
White
1520kg Revenue Weight
MOT Expired 26 October 2024
Vehicle is Taxed
Ref - 67
Location - Maintenance
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Shaking Ladle
A vessel used and placed into furnace
Approximate Dimensions: Height - 200cm Width - 120cm Depth - 120cm
Ref - 68
Location - Furnace
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Shaking Ladle
A vessel used and placed into furnace
Approximate Dimensions: Height - 200cm Width - 120cm Depth - 120cm
Ref - 69
Location - Furnace
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Lifting Hoist WLL 55kg
Approximate Dimensions: Height - 250cm Width - 250cm Depth -15cm
Location - Factory
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Hopper
Approximate Dimensions: Height - 5metre Width - 209cm Depth - 150cm
Location - Factory
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Dalmec Lifting Arm
Max SWL 150Kg
Approximate Dimensions:
Height - 300cm
Width - 400cm
Depth - 300cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 72 Location - Fabrication Room
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Plymovent Extraction Arm
Approximately Dimensions: Width- 30cm Length - 500cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 73 Location - Fab Shop
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Plymovent Extraction Arm
Approximately Dimensions: Width- 30cm Length - 500cm
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 74 Location - Fab Shop
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Lifting Hoist Frame
Includes 9 beams
Approximate Dimension: Height - 4m Width - 15m Depth -10m
hoist not included
** PLEASE NOTE - this lot is not available for extraction until July 2025 **
Ref - 76
Location - Fab Shop
RAMS and a copy of your Public Liability certificate should be sent to info@ncmauctions.co.uk 48hrs before collection
Collection location: Melton Mowbray, LE14. The NCM Reception will be located In the Security hut. Customers should report to the security hut and will then be directed to the designated parking area and the customer meeting point at the maintenance building.
There is no lift on site however all lots are at in the main factory are at ground floor level. The office block is situated over 2 floors with stairs access to the second floor. It has not yet been confirmed whether a forklift truck will be available on site.
Viewing day: Viewing is available by prior appointment only on Wednesday 19th February 2025 between 10am and 3pm
Collection days: Collection will be available by appointment only from Wednesday 26th February 2025 to Friday 28th February 2025
Collection times: Collection will be available between 10am and 5pm on Wednesday 26th February and 9.30am and 5pm on the Thursday & Friday by appointment only
Collection fee for lots: not applicable for lots in this auction.
High visibility clothing, safety headwear and safety footwear will be required on site at all times
Please note: Where any electrical items are included in lots these have not been turned on or tested unless specifically stated
The winning bidder is responsible for dismantling, removing and loading their own items. Services such as gas, water and electricity will be switched off prior to collections but will need to be disconnected.
If your item requires dismantling, please ensure that you provide competent persons with their own tools to carry out the dismantling process of your item(s).
Please ensure that your vehicle is suitable for the dimensions, weight and total number of the lots that you bid on.
Please note that you are bidding on the items described only; any additional items that are pictured, such as appliances in the background, small items on tables, chairs next to tables, stock pictured on rails or displays, small items on shelves that are not described above, will not be included with this lot.
Invoices should be paid no later than 4 p.m. on Sunday 23rd February 2025.
What is a Risk Assessment & Method Statement (RAMS)?
A RAMS document, which stands for Risk Assessment & Method Statement, is a crucial safety tool used primarily in construction and other high-risk industries. It's essentially a two-part plan that helps identify potential hazards associated with a specific task and outlines the steps to be taken to safely complete it.
Completing a RAMS Document:
Please refer to the following link to the Health & Safety Executive website for further information and a downloadable RAMS template:
https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.