Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Venue address
DL16
United Kingdom
Industrial Engineering Equipment Direct From Rubber Tools Manufacturer – Due to Closure
Industrial Presses, Lathes, Milling Machines, Compressors, Saws, Industrial Ovens, Hydraulic Pumps, Shot Blasting Machines & More
Auction dates
Starts:
Jul 07, 2025 05:30 PM BST
Ends from:
Jul 24, 2025 11:00 AM BST
Viewing dates
By appointment only
Jul 23, 2025 10:00 AM - 02:00 PM BST
|
Auction currency
|
GBP |
|
Buyer's premium
|
25 % |
|
Sales tax
|
20 % |
|
Accepted cards
|
|
|
Other payment methods
|
There are 275 lots within this auction
Refine results
Filter by
Primary Category
Category
Brand
Item Type
Sale Section
Country
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Important Information Only – Lot 0 Viewing Viewing is available and strongly recommended for all items of interest. Viewing will be held strictly by appointment only on: - Wednesday 23rd July - Between 10:00am – 2:00pm To book a viewing slot, please contact us in advance. Payment All invoices must be paid in full by: - Monday 28th July 2025 at 4:00pm Late payments may result in cancellation of your purchases. Collections Collections will take place by appointment only on the following dates: - Tuesday 5th August, Wednesday 6th August & Thursday 7th August 2025 between 10am and 4pm Please ensure: - Your vehicle is suitable for the size and number of lots purchased. The r ear yard has no artic access but smaller HGVs will be okay, Artics will be able to go to the front entrance - You bring sufficient manpower for lifting and loading. - A forklift is currently available on site although we cannot guarantee access for this forklift on collection your your lots On-Site Requirements - High visibility jackets must be worn at all times on-site. - Site rules must be adhered to as directed by staff. Lot Details Please note: - You are bidding only on the items described in the listing. - Items pictured but not described (e.g. background appliances, chairs next to tables, stock on rails, small items on shelves) are not included in the lot. Electrical Items Unless specifically stated: - Electrical items have not been tested or turned on. - These items are sold as seen, with no warranty or guarantee. Contact Us For any queries, please contact: Email: info@ncmauctions.co.uk Phone: 01302 898260 Opening Hours: Monday – Friday, 9:00am – 5:30pm
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Snow Horizontal Surface Grinder
Machine Number - 6006
No other visible plate
Approximate Dimensions:
Height - 280cm
Width - 590cm
Depth - 210cm
Ref - 1
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hurco VMX24 CNC Milling Machine
Model: VMX24
MFG number: H20187
Drill Bits and work bench included
Approximate Dimensions:
Height - 250cm
Width - 300cm
Depth - 300cm
Ref - 2
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bridgeport 2S Milling Machine
Serial - 2750D
400-440V
3 Phase
50Hz
Approximate Dimensions:
Height - 190cm
Width - 220cm
Depth - 170cm
Ref - 3
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hurco Hawk 5m CNC Knee Mill
MFG number: KM97A0788
Serial number: R5M92101117A
Amps - 10,000A
Voltage - 8kVA
Freq - 50Hz
Adjacent cabinet included
Approximate Dimensions:
Height - 300cm
Width - 250cm
Depth - 200cm
Ref - 4
Location - Tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Societe Genevoise Milling Machine
Type - MP 5G
No - 730
T - 20 degrees
200-250V
50Hz
Approximate Dimensions:
Height -250cm
Width - 230cm
Depth - 240cm
Ref - 5
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Richmond 600 SR2 Radial Drill
No visible plate
3 Phase
Approximate Dimensions:
Height - 240cm
Width - 70cm
Depth - 150cm
Ref - 6
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ajax AJT1 Turret Milling Machine
Type: 32004
Serial Number: B47446
Approximate Dimensions:
Height - 250cm
Width - 200cm
Depth - 200cm
Ref - 7
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Mitsubishi DWC 90 EDM Machine Setup
Includes: Chiller Filtration system
Control cabinet
Transformer
3 Phase
400v
Serial number: 0609J248
Approximate Dimensions:
Height - 210cm
Width - 300cm
Depth - 300cm
Ref - 8
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Denbigh Manual Fly Press
Approximate Dimensions:
Height -200cm
Width - 90cm
Depth - 100cm
Ref - 9
Location - Tool Room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Charmiles Eleroda 110
Includes table and connected parts
No visible makers plate
Approximate Dimensions:
Height - 210cm
Width - 150cm
Depth - 80cm
Ref - 10
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Jones-Shipman 1400 Horizontal Surface Grinder
Model: 65516
DBT: 7479
Serial number: 41698W1
Approximate dimensions:
Height - 180cm
Width - 230cm
Depth - 170cm
Ref - 11
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ribon Rur 500 Cylindrical Grinder
No visible makers plate
Approximate Dimensions:
Height - 150cm
Width - 200cm
Depth - 90cm
Ref - 12
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
The Midsaw Minor Bandsaw
Machine Number - E5544
3 Phase
415V
Approximate Dimensions:
Height -180cm
Width - 50cm
Depth - 90cm
Ref - 13
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Startrite Metora UMB220
Type - UMB250
Serial- 5180611
415V
3Phase
Approximate Dimensions:
Height - 100cm
Width - 145cm
Depth - 60cm
Ref - 14
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hardridge HLV-H Lathe
Model: HLV-H
Volts: 400-440V
HP: 1.5
3 Phase
400-440v
50Hz
Approximate dimensions:
Height- 170cm
Width - 200cm
Depth - 170cm
Ref - 15
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hauser P750 Profile Projector
Machine Number - 165
420V
3 Phase
50Hz
approx 700 kg
Approximate Dimensions:
Height -190cm
Width - 110cm
Depth - 140cm
Ref - 16
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Dean Smith Grace 1306 x 40 Lathe
415v
3 Phase
Approximate Dimensions:
Height - 170cm
Width - 330cm
Depth - 130cm
Ref - 16
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Tesa Measuring Gauge
No Reserve
Includes wood Box
Approximate Dimensions:
Height -80cm
Width - 25cm
Depth - 10cm
Ref - 18
Location - Tool Room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Chesterman Vertical Height Gauge
No Reserve
Includes wood box
Approximate Dimensions:
Height - 12cm
Width - 75cm
Depth - 20cm
Ref - 19
Location - Tool Room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Black & Decker 10 Inch Bench Grinder
No Reserve
Approximate Dimensions:
Height - 120cm
Width - 70cm
Depth - 60cm
Ref - 20
Location - tool room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Formula Manual Forklift
No Reserve
Approximate Dimensions:
Height - 190cm
Width - 70cm
Depth - 130cm
Ref - 21
Location - Tool Room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
ESAB LHF 250 Welding Station
No Reserve
Serial - 208-225-0460
Approximate Dimensions:
Height - 70cm
Width - 50cm
Depth - 110cm
Ref - 22
Location - Tool Room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Electric Heat Treatment Kiln
No Reserve
Bench Included
Approximate dimensions of full setup:
Height - 170cm
Width - 130cm
Depth - 65cm
Ref - 23
Location - tool room
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Baker Perkins Internal Blender Mixer
Chain drive motor
includes NABEN BLADES
Internal Dimensions: 52cm x 52cm
Hydraulic Tilt Plant Number: 198
Approximate Dimensions:
Height - 160cm
Width - 200cm
Depth - 130cm
Ref - 24
Location - Mill room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Rius Yarn Winding Machine
MTP- 600x300
Date: 07-05
380volts
50Hz
3 phase
Spooling and measuring machine, for special tapes as technical foams and cords
The product can either be elastic or rigid
Electronic frequency variator (inverter)
Pre-selection electronic meter counter
Electronic adjustable traverse motion up to 60 mm
Beam blockage by means of pneumatic system, by pedal
Positive feeder, synchronized with the main axis, and located in the center of the beam
Automatic elevation movement of the thread-guide, according to the diameter of the beam
Tachometer with speed indicator
Start-up and stop by means of pedal
The frame is mounted on wheels for an easy displacement of the machine.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Whittakers 2 Roll Mill
Machine Roll measurements 25cm diameter 40cm Width
Brook Motor
400/440V
3 Phase
1460RPM
50Hz
20Hp
Plate not visible
With scraper blade
Fully guarded
Left hand angle driver
Used on silicon
hand nip
Filton rotary joints for water cooling
Approximate Dimensions:
Height - 175cm
Width - 190cm
Depth - 170cm
Ref - 26
Location - Tool Room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Francis Shaw Two - Roll Mill
Brook 20Hp Motor
400V
50Hz
3Phase
Scraper blade
Hand Nip
Caliper brake system
Roll dimensions: Width - 43cm Diameter - 25cm
Approximate Dimension:
Height - 190cm
Width - 230cm
Depth - 180cm
Ref - 27
Location - Mill room
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Econocut Automatic Cutoff Saw
No Reserve
Industrial Bar/Tube Cutting machine
Approximate Dimensions:
Height - 122cm
Width - 146cm
Depth - 105cm
Ref - 28
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
TH & J Daniels Twin 75 Ton Hydraulic Press
Downstroking Press
Serial - 532132
75 Tons
WP - 3360
Electric heated
Platen Size - 14 inch
Square Daylight - 16 inch
4 columns
Hand operated controllers
No visible branding or maker plate
Approximate Dimensions:
Height - 300cm
Width - 220cm
Depth - 100cm
Ref - 29
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press 1
Approximately 100 Ton Press
Item is 1 of a bank of 5 presses.
This is for the press only.
No visible makers plate
Platen Size - 40x40cm
Electrically heated platens
Sliding table back
Downstroking
Approximate Dimensions:
Height - 180cm
Width - 80cm
Depth - 280cm
Ref - 30
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press 2
Approximately 100 Ton Press
Item is 1 of a bank of 5 presses.
This is for the press only.
No visible makers plate
Platen Size - 40x40cm
Electrically heated platens
Sliding table back
Downstroking
Approximate Dimensions:
Height - 180cm
Width - 80cm
Depth - 280cm
Ref - 31
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press 1
Approximately 100 Ton Press
Item is 1 of a bank of 5 presses.
This is for the press only.
No visible makers plate
Platen Size - 40x40cm
Electrically heated platens
Sliding table back
Downstroking
Approximate Dimensions:
Height - 180cm
Width - 80cm
Depth - 280cm
Ref - 32
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press 4
Approximately 100 Ton Press
Item is 1 of a bank of 5 presses.
This is for the press only.
No visible makers plate
Platen Size - 40x40cm
Electrically heated platens
Sliding table back
Downstroking
Approximate Dimensions:
Height - 180cm
Width - 80cm
Depth - 280cm
Ref - 33
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press 5
Approximately 100 Ton Press
Item is 1 of a bank of 5 presses.
This is for the press only.
No visible makers plate
Platen Size - 40x40cm
Electrically heated platens
Sliding table back
Downstroking
Approximate Dimensions:
Height - 180cm
Width - 80cm
Depth - 280cm
Ref - 34
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel Press Control Panel
Type - 5X100DR
415V
50Hz
Date - 12/86
Tonnes - 5x3.0
Approximate Dimensions:
Height - 200cm
Width - 78cm
Depth - 40cm
Ref - 36
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Hot Air Oven
No Reserve
No maker plate or banding visible
Approximate Dimensions:
Height - 140cm
Width - 110cm
Depth - 110cm
Ref - 35
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Richmond Industrial Vacuum Pump & Tank System
No Reserve
Approximate Dimensions of Lot:
Height - 170cm
Width - 160cm
Depth - 90cm
Ref - 37
Location - main warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Richmond Industrial Vacuum Pump & Tank System
No Reserve
Approximate Dimensions of Lot:
Height - 170cm
Width - 160cm
Depth - 90cm
Ref - 38
Location - main warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Large Press
No Reserve
No Brand
Spares and Repairs
Approximate Dimensions:
Height - 250cm
Width - 190cm
Depth - 200cm
Ref - 39
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Albro Automation Hydraulic Pack
Serial - 111-G 1217 With Bipel Control panel
Type - 230 BAR D/U
415V
50Hz
1.5Tonne
Date - 12/86
Approximate Dimensions:
Height - 200cm
Width - 200cm
Depth - 110cm
Ref - 40
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Vacuum Cleaner
No Reserve
Approximate dimensions:
Height - 120cm
Width - 90cm
Depth - 90cm
Ref - 41
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Mackley Bowley Press
No Reserve
Top has been removed
Approximate Dimensions:
Height - 160cm
Width - 110cm
Depth - 60cm
Ref - 42
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Busch Vertical Air Storage Tank
No Reserve
Serial Number: 10264-1
Design pressure: 160 PSI
Approximate Dimensions:
Height - 240cm
Width - 80cm
Depth - 80cm
Ref - 43
Location - main warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Vixen Surface Treatment Jetwash
No Reserve
Year - 1997
Model - JW 99
Serial - 777
Approximate Dimensions:
Height - 120cm
Width - 125cm
Depth - 160cm
Ref - 44
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bradley and Turton Twin Hydraulic Press - No Reserve
No Reserve
Electric heated platen
4 column 50 Ton Press x2
Platen Size - 38x40cm
Daylight - 30cm
Approximate Dimensions:
Height - 200cm
Width - 160cm
Depth - 40cm
Ref - 45
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bradley and Turton Twin Hydraulic Press
No Reserve
Electric heated platen
4 column 50 Ton Press x2
Platen Size - 38x40cm
Daylight - 30cm
Approximate Dimensions:
Height - 200cm
Width - 160cm
Depth - 40cm
Ref - 46
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bradley and Turton Twin Hydraulic Press - No Reserve
Electric heated platen
4 column 50 Ton Press x2
Platen Size - 38x40cm
Daylight - 30cm
Approximate Dimensions:
Height - 200cm
Width - 160cm
Depth - 40cm
Ref - 47
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
100 Tonne Hydraulic Press
No visible branding or make
Press Platen Size - 51x51cm
Daylight - 30cm
Electric heated platen
Approximate Dimensions:
Height - 190cm
Width - 80cm
Depth - 60cm
Ref - 45
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel 120 Ton Press
415V
50Hz
3 Phase
3.5 Tonne
Press Platen Size - 50x50cm
Approximate Dimensions:
Height - 200cm
Width - 144cm
Depth - 135cm
Ref - 49
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel 120T U/R Press
415V
50Hz
3 Phase
30 Amps
Year - 1980
3.074 Tonnes
Platen size - 50x51cm
Approximate Dimensions:
Height - 200cm
Width - 130cm
Depth - 110cm
Ref - 51
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bipel 120T U/R Press
415V
50Hz
3 Phase
30 Amps
Year - 1980
3.074 Tonnes
Platen size - 50x51cm
Approximate Dimensions:
Height - 200cm
Width - 130cm
Depth - 110cm
Ref - 51
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Industrial Twin Press
No branding or makers plate
Platen size - 40x50cm
Daylight - 20cm
Approximate Dimensions:
Height - 180cm
Width - 200cm
Depth - 90cm
Approximately 3.5 Tonnes
Ref - 52
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 53
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 54
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
No Reserve
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 55
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 56
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 57
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 58
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Daniels 100 Ton Hydromold Press
400V
12A
3 Phase
50Hz
Includes lights
Platen size 44x50cm
Approximate Dimensions:
Height - 170cm
Width - 110cm
Depth - 90cm
Ref - 59
Location - Main Warehouse
We will require a Risk Assessment & Method Statement (RAMS) for the removal of this lot. Your RAMS should be sent to sam@ncmauctions.co.uk at least 48 hours before extraction
Please refer to lot 0 for further important information
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.